en
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
TP304L 25.4*2.11mm U Bend Stainless Steel Heat Exchanger Tube
- TP304L 25.4*2.11mm U Bend Stainless Steel Heat Exchanger Tube
Material: 304L, 1.4306, S30403, 1.4307;
Get A Quote
TP304L 25.4*2.11mm U Bend Stainless Steel Heat Exchanger Tube
Heat Exchanger Tube:
Our heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry, water heater industry, air-conditioning industry, etc. This kind of seamless tube has a very important position in our all products.
Heat Exchanger Tube Chemical Composition——Basic Raw Materials:
ASTM/UNS | C (max) | Si (max) | Mn (max) | P (max) | S (max) | Cr | Ni | Mo | Ti |
TP304/S30400 | 0.080 | 1.00 | 2.00 | 0.045 | 0.03 | 18.0-20.0 | 8.0-10.5 | ||
TP304L/S30403 | 0.035 | 1.00 | 2.00 | 0.045 | 0.03 | 18.0-20.0 | 8.0-13.0 | ||
TP304H/S30409 | 0.04-0.10 | 1.00 | 2.00 | 0.045 | 0.03 | 18.0-20.0 | 8.0-11.0 | ||
TP316/S31600 | 0.080 | 1.00 | 2.00 | 0.045 | 0.03 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | |
TP316L/S31603 | 0.035 | 1.00 | 2.00 | 0.045 | 0.03 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | |
TP316Ti/S31635 | 0.080 | 1.00 | 2.00 | 0.045 | 0.03 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 0.7>5x(C+N) |
TP321/S32100 | 0.080 | 1.00 | 2.00 | 0.045 | 0.03 | 17.0-19.0 | 9.0-12.0 | 0.7>5x(C+N) | |
TP317L/S31703 | 0.035 | 1.00 | 2.00 | 0.045 | 0.03 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | |
TP347H/S34709 | 0.04-0.10 | 1.00 | 2.00 | 0.045 | 0.03 | 17.0-19.0 | 9.0-13.0 | ||
TP309S/S30908 | 0.080 | 1.00 | 2.00 | 0.045 | 0.03 | 22.0-24.0 | 12.0-15.0 | 0.75 | |
TP310S/S31008 | 0.080 | 1.00 | 2.00 | 0.045 | 0.03 | 24.0-26.0 | 19.0-22.0 | 0.75 |
Heat Exchanger Tube Application:
a) Petroleum, Chemical enterprise, superheater of boiler and heat exchanger
b) High temperature-resistant transmission fluid pipe in power station
c) Ship with pressure pipe
d) Exhaust purification device
e) Construction and ornament
f) solar industry, military, semiconductor, etc
Heat Exchanger Tube Process :
1 . We use Cold Drawn technology to produce U bend tube
2. U bend tubes produce will accordance to customer's drawings
3 . To avoid oxidation, inert gas (Argon) is passed through tubes ID at the required flow rate
4 . The radius is checked for its OD and wall thinning with the recommended specification
5 . We'll choose three different positions or as customers require to make sure tubes quality. We'll do physical properties and micro-structure test
6 . Visual inspection for waviness and cracks is done with Dye Penetrant Test
7 . Each tube is then hydro tested at the recommended pressure to check for leakage
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Related Products: Seamless Tube: Annealed Pickled Heat Exchanger Tube
1 / 2 Inch Sch40 TP321 Stainless Steel U Tube Heat Exchanger Tube
Heat exchanger tube is the most common type of heat exchanger in oil refineries and other large chemical processes and is suited for higher-pressure applications....
Chemical Equipment Used 31.8mm Cold Rolled Nickel Alloy Straight/ U Bend Tube Corrosion Resistance
Grade Alloy 600; Alloy 601; Alloy 800; Alloy 825; TP304 ; TP304H ; TP304L ; TP316 ; TP316L; S31803 Standard:ASTM B622; ASTM B516; ASTM B444; ASTM B829; ASTM A789; ASTM A213; ASTM A269; ASTM A270; EN10216-5 ,etc Size Routine OD : 19.05mm,25.4mm,31.8mm,38.1mm WT : 1.2-2.77mm Length:According to cu......
ASTM A213/269 Heat Exchange Stainless Steel Tubing With A&P Surface For Pressure Vessel
Grade: TP304 ; TP304H ; TP304L ; TP316 ; TP316L ; TP 321 ; TP321H ; TP317L ; TP310S ; TP347H Standard: ASTM A213 , ASTM A 269 , ASTM A789 , etc Size: Routine OD : 19.05mm,25.4mm,31.8mm,38.1mm WT : 1.2-2.77mm Length: According to customer needs up to 20m...