en
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
ASTM A249 TP304/S30400 Stainless Steel ERW Tube
SSHEWT05 - ASTM A249 TP304 / S30400 Stainless Steel ERW Straight Tube For Heat Exchanger
Material: 304, 1.4301, X5CrNi18-10; 304H, S30415, 1.4948, S30409; 304L, 1.4306, S30403, 1.4307;
Get A Quote
ASTM A249 TP304 / S30400 Stainless Steel ERW Straight Tube For Heat Exchanger
Our heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry , water heater industry , air-conditioning industry etc . This kind of seamless tubes are have a very important position in our all products .
ASTM A249 Standard :
| Size OD | Nominal Wall | Outside Diameter | Length | Wall |
| 1/2" (12.7) | 0.065" (1.65)/0.049" (1.25) | +/-0.005 (0.13) | +1/8" (3.18) - 0 | +/-10.0% |
| 3/4" (19.1) | 0.065" (1.65)/0.049" (1.25) | +/-0.005 (0.13) | +1/8" (3.18) - 0 | +/-10.0% |
| 1" (25.4) | 0.065" (1.65)/0.049" (1.25) | +/-0.005 (0.13) | +1/8" (3.18) - 0 | +/-10.0% |
| 1-1/2" (38.1) | 0.065" (1.65)/0.049" (1.25) | +/-0.008" (0.20) | +1/8" (3.18) - 0 | +/-10.0% |
| 2" (50.8) | 0.065" (1.65)/0.049" (1.25) | +/-0.008" (0.20) | +1/8" (3.18) - 0 | +/-10.0% |
| 2-1/2" (63.5) | 0.065" (1.65) | +/-0.010" (0.25) | +1/8" (3.18) - 0 | +/-10.0% |
| 3" (76.2) | 0.065" (1.65) | +/-0.010" (0.25) | +1/8" (3.18) - 0 | +/-10.0% |
| 4" (101.6) | 0.083" (2.11) | +/-0.015" (0.38) | +1/8" (3.18) - 0 | +/-10.0% |
| 6" (152.4) | 0.083" (2.11) | +/-0.030" (0.76) | +1" (25.4) - 0 | +/-10.0% |
| 6" (152.4) | 0.109" (2.77) | +/-0.030" (0.76) | +1" (25.4) - 0 | +/-10.0% |
| 8" (203.2) | 0.109" (2.77) | +0.061" (1.55)/-0.031" (0.79) | +1" (25.4) - 0 | +/-10.0% |
Application
a) For fluid & gas transport
b) Structure & machining etc
Advantages
a) Advanced technology of cold draw machine
b) Advanced annealing machine
c) Better mechanical property
d) More precise dimension
e) Perfect inspection method and inspection equipment etc
Process :
1 . We use Cold Drawn techonology to produce U bend tube
2 . U bend tubes produce will accordance to customer's drawings
3 . To avoid oxidation , inert gas (Argon) is passed through tubes ID at the required flow rate
4 . The radius is checked for its OD and wall thinning with the recommended specification
5 . We'll choose three different position or as customer's require to make sure tubes quality . We'll do physical properties and micro-structure test
6 . Visual inspection for waviness and cracks is done with Dye Penetrant Test
7 . Each tube is then hydro tested at the recommended pressure to check for leakage
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Related Products: Welded Pipe: Welded Tube
ASTM A249 TP316L / 1.4404 Straight Stainless Steel Welded tubing With ERW / EFW
Application a) For fluid & gas transport b) Structure & machining etc Advantages a) Advanced technology of cold draw machine b) Advanced annealing machine c) Better mechanical property d) More precise dimension e) Perfect inspection method and inspection equipment etc Process : 1 ......
1 Inch TP321 / 321H Stainless Steel Heat Exchanger U Bend Welded Tube For Chemical Industry
MTSCO heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry , water heater industry , air-conditioning industry etc . This kind of seamless tubes are have a very important position in our all products . Process : 1 . We use Cold Dra......
1 / 2 Inch Duplex Steel Small Diameter Welded Tube
1.Material Grade S32205, S31803, S32304, S32750, F51, F53, 2205, 2507 etc 2.Outer Diameter3.18mm to 101.6mm 3.Wall Thickness 0.5mm to 20mm 4.Length Normally fixed length 6m, can as per customer’s requirement 5.Standard ASTM A789; ASTM A790; EN 10216-5 etc. 6.Process Method Cold Drawn or Cold R......